Ezurio BL54L15 BLUETOOTH® Modules
Ezurio BL54L15 BLUETOOTH® Modules are powered by the Nordic semiconductor's nRF54L15 System on Chip (SoC). These modules support multi-protocols such as Bluetooth® core 6.0 LE and 802.15.4 (Thread/Matter). The BL54L15 modules feature a 128MHz Arm® Cortex® M33, 128MHz RISC-V co-processor, 1.5Mb non-volatile memory, up to +8dBm maximum transmit power and an ultra-small footprint. These modules are capable of NFC A-tag implementation. The BL54L15 modules operate within the 1.7V to 3.6V supply voltage range and are RoHS compliant. The BL54L15 modules are built on the nRF54L15 ultra-low-power wireless System-on-Chip (SoC). The nRF54L15 SoC features a 128MHz Arm® Cortex-M33 processor, integrated multi-purpose MCU functionality, 1.5MB NVM, and 256KB RAM.
The BL54L15 modules are designed for PSA-certified level 3 with secure boot, secure firmware update, and secure storage. These modules are certified to the -40°C to 105°C industrial temperature range. The BL54L15 modules are used in applications such as building automation, security, medical peripherals, and industrial sensors.
Features
- Powered by the Nordic nRF54L15 SoC
- Multi-protocol support:
- Bluetooth core 6.0
- 802.15.4 (Thread/Matter)
- 128MHz Arm® Cortex® M33 processor
- 128MHz VPR RISC-V co-processor core
- Memory:
- 1.5MB non-volatile memory
- 256KB RAM
- Integrated pre-certified PCB Trace antenna or external antenna support via MHF4 connector
- -40°C to 105°C extended industrial temperature rating
- Development choice:
- Zephyr RTOS
- Nordic nRF connects SDK and canvas
- Bluetooth LE:
- Peripheral/central
- 2Mbps (high throughput)
- LE coded (long range)
- AoA/AoD and mesh
- Firmware Over the Air (FOTA) via MCUboot and Zephyr
- Supports secure boot, secure firmware update, and secure storage
Specifications
- Host interface and peripherals:
- UART interface:
- TX, RX, CTS, RTS, DTR, DSR, DCD and RI (GPIO)
- Default: 115200, N, 8, and 1. Configurable from 1200bps to 1Mbps
- Other:
- 31 functions that GPIOs can provide:
- 5x UART/SPI/TWI
- 8x ADC channels (1 pin each)
- 2x I2S (5 GPIO pins)
- 3x PWM output (1 GPIO pin per PWM)
- 7x TIMER (no GPIO needed unless required)
- 2 GPIO pins for 32.768kHz crystal
- 1x NFC (2 GPIO pins)
- 2x QDEC
- 20x Wakeup pins
- 31 functions that GPIOs can provide:
- UART interface:
- 2.402GHz to 2.480GHz frequency range
- Receive sensitivity:
- -98dBm (typical BLE 1Mbps)
- -106dBm (typical BLE 125kbps)
- +8dBm maximum transmit power
- Link budget:
- 106dB (@ Bluetooth LE 1Mbps)
- 114dB (@ Bluetooth LE 125kbps)
- 1.7V to 3.6V supply voltage range
- 14mm x 10mm x 1.6mm footprint
Applications
- Security
- Building automation
- Medical peripherals
- Industrial sensors
Development Tools
Ezurio BL54L15 Development Kits
Designed to enable testing and validation of all the hardware interfaces of the BL54L15 module.
Related Modules
Ezurio BL54H20 Series Multi-Core BLE Modules
Integrate BLUETOOTH LE 5.4, 802.15.4 protocols (Thread/Matter), and NFC, delivering high-performance
Ezurio BL54L15μ Multiprotocol Modules
Ultra-compact modules that are available in a 6.3mm x 7.9mm x 1.75mm footprint.
Ezurio BL54L10 Multiprotocol Modules
Feature a 128MHz Arm® Cortex®-M33 and 128MHz RISC-V co-processor.
Ezurio BL54L series of Nordic nRF54L BLUETOOTH LE Modules
Offers unparalleled performance, security, and efficiency with cutting-edge technology.
Related System on Chip
Nordic Semiconductor Sistemas en Chip (SoC) nRF54L de BLUETOOTH® Low Energy
Features a 2.4GHz radio that offers up to +8dBm Tx power in 1dB increments.