Todos los resultados (1,681)

Accesorios SparkFun This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration. You should not need this adapter with any of our antennas or

Accesorios SparkFun This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM317 adjustable regulator contained in a handy surface mount package. Requires two external resistors to

Accesorios SparkFun The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines.Features:2.7V to

Accesorios SparkFun This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover.

Accesorios SparkFun LED - SMD RGB

Accesorios SparkFun 1.0M Ohm 1/4th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones). Note: Sold as singles. But check below fo

Accesorios SparkFun You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 yellow 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode

Accesorios SparkFun Screw Terminals 5mm Pitch (3-Pin)

Accesorios SparkFun This is the SMD version of PRT-07948 which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is con

Accesorios SparkFun This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now but never the female. Now you have the ability to get both!Pins have 0.1" spacing between rows and between pins.Docu

Accesorios SparkFun TRRS connectors are the 3.5mm audio-style connectors that you see on some phones MP3 players and development boards. TRRS stands for "Tip Ring Ring Sleeve " which reflects the fact that unlike a standard stereo connector this actually has three

Accesorios SparkFun USB C is fantastic. But until we have converted all our hubs chargers and ports over to USB C this is the cable you're going to need. Supporting USB 3.1 speeds and charging up to 3A this 1 meter cable is perfect for high data rate transfers and ch